The tools

What tools did I use?

Power drill to cut the holes for the outlet in the bottom side of the wheeliebin, and for the rivet holes

Jigsaw to cut the hole in the top

Rivet gun to fasten the flywire to the lid

Round rasp to get the outlet hole size right

Tin snips or even an old pair pair of scissors can cut the metal flywire

Hacksaw to cut into the metal downpipe to fit the diverter

Multigrips to tighten the outlet fittings

Piece of wire  to feed the fitting through the bin from the inside to the outside

I should have worn safety glasses, and I should have worn gloves as you will soon see.

Tip: Smart way to use scissors: hold the top edge of the scissors to the surface while cutting and cut so the bottom
blade does all the work, this makes it much easier to cut in a straight line. 🙂